TechniksUSA

TechniksUSA is a leading manufacturer of: tool holders, collet chucks, ER collet chucks, TG collet chucks, end mill holders, DIN B coolant, coolant-thru holder, tap collets, pull studs, toolholders, milling chucks, jacobs chuck, drill chucks, BT30, BT40, CAT40, CAT50, HSK, ISO30, CNC router tooling, collet holder, aggregate head, shell mill arbors, face mill arbors, shrink fit holders, shrink-fit machines, tap holders, rigid tapping, tap collets, boring tools, finish head, rough head, boring heads, magnetic workholding, magnetic chucks, electroperm chucks, lifting magnets, magnetic vises, magnetic lifting, ER collet, TG collet, DA collet, spring collet, Perske collet, SYOZ collets, coolant collets, sealed collets.

Check out all of their social media site for more information:

	DualDRIVE Holders for DUAL-CONTACT DUAL-CONTACT machining means the spindle face contacts the tool holder flange for improved performance. DualDRIVE works with standard and non-standard spindles. Call for details. Choose from a wide range of DualDRIVE toolholders including: ER Collet Chucks, End Mill Holders, Shrink-Fit Holders, and Shell Mill Arbors Use DualDRIVE when high material removal rates and improved surface finish are desired. Features Improves rigidity, reduces vibration - even on standard spindles! Increase feed rates up to 20% Extend tool life and reduce scrap CoolFLEX DIN B coolant feature on ER Collet Chucks and Shrink-Fit tool holders Click HERE to go to the product page. If you have any questions call us at: (800) 597-3921, or send us an email: info@techniksusa.com to request our catalog.

	New SIMIS ER Collet Chucks Value-priced ER Chucks offer good performance at a price that won't break the bank. Features T.I.R. 0.0002" Balanced to 18,000 RPMs Taper ground to AT3 accuracy Click HERE to go to the product page. If you have any questions call us at: (800) 597-3921, or send us an email: info@techniksusa.com to request our catalog.

	New SIMIS End Mill Holders If you are looking for quality End Mill holders at an affordable price, give our new SIMIS holders a try. Features H7 Bore Tolerance Balanced to 8,000 RPMs Taper ground to AT3 accuracy Click HERE to go to the product page. If you have any questions call us at: (800) 597-3921, or send us an email: info@techniksusa.com to request our catalog.

	New Design: CoolBLAST Shrink Fit Holders Features CoolBLAST for maximum feed rates T.I.R. only 0.0001" Balanced to 25,000 RPM at G2.5 Puts coolant right on the cut at high speed Extends cutting tool life Click HERE to go to the product page. If you have any questions call us at: (800) 597-3921, or send us an email: info@techniksusa.com to request our catalog.

	New Design: Standard Milling Chucks Features T.I.R. maximum 0.0004" at 4x tool diameter Exceptional rigidity under side loads 3,500 ft./lbs. of holding power Increase speeds and feeds Rounded slots prevent tool slippage Cannot be overtightened! Click HERE to go to the product page. If you have any questions call us at: (800) 597-3921, or send us an email: info@techniksusa.com to request our catalog.

	New Design: Heavy-Duty Milling Chucks Features 4,700 ft./lbs. of holding power Exceptional rigidity under side loads T.I.R. maximum 0.0004" at 4x tool diameter Increase speeds and feeds Rounded slots prevent tool slippage Cannot be overtightened! Click HERE to go to the product page. If you have any questions call us at: (800) 597-3921, or send us an email: info@techniksusa.com to request our catalog.

	Steel Sealed Coolant Collets No Seals To Fail – EVER! Features: No seals to fail Sealed up to 2,000 P.S.I. No coolant discs to install Uses standard ER holders and nuts You can click HERE to see the full line of Steel Sealed Coolant Collets. For more information please call us at: (800) 597-3921, or send us an email: info@techniksusa.com to request our catalog.

	Slim-Fit Modular Tool Holding System Slim-Fit provides the reach and accuracy you need, PLUS the ability to change tools easily. Slim-Fit combines the best features of collet chucks, (fast tool changes and fits a variety of shank sizes) with unmatched rigidity, accuracy, and balance. All in one system. • Collets for fast tool changes • Slim design fits in tight spaces • T.I.R. only 0.0002" • Balanced to 25,000 RPM @ G2.5 You can click HERE to find out more about Slim-Fit, or call us at: (800) 597-3921. Send us an email: info@techniksusa.com to request our catalog by mail.

	CoolBLAST End Mill Holders Our special coolant-thru end mill holders feature special grooves in the bore that allow coolant to flood the tool and cutting zone. The additional coolant allows you to increase feed rates and extend tool life. Available for 1/4", 3/8" 1/2", 3/4" and 1" shank sizes. You can click HERE to find out more about these holders, call us at: (800) 597-3921, or send us an email: info@techniksusa.com to request our catalog.

	CoolFLEX DIN or Coolant-Thru End Mill Holders CoolFLEX ER collet chucks and end mill holders feature a coolant path that can be switched from coolant-thru spindle to DIN style coolant simply by removing two setscrews. Now you don't have to buy machine-specific toolholders. CoolFLEX holders are available in ER collet chucks and endmill holder styles for CAT40 and CAT50 spindles. The collet chucks are available in sizes from ER16 to ER40 and are balanced to 25,000 RPM. The endmill holder styles range from I.D. 1/4” to I.D. 1-1/4” and are balanced to 10,000 RPM. Click HERE for more information or call us at: (800) 597-3921. Send us an email to: info@techniksusa.com to request the CoolFLEX brochure sent to you by email in pdf format.

TechniksUSA

Photos

Social

Members

Newspaper